Serpent Inflatable Flood Tubes
Protect Your Property From Flood Damage
The Serpent™ inflatable flood control tube is a full scale flood protection system that is meant to provide a bigger solution for already big flood threats. Serpent™ flood barriers are completely air filled with a focus on speed and convenience. A 30ft length Serpent™ berm can inflate in under 12-18 minutes. Sections can be connected to create a larger barrier.
Available in 15ft and 30ft length tubes, Serpent™ can protect up to 3ft in height against dangerous flooding. Achieve efficient and durable flood protection that also provides convenience. Serpent™ deflates, rolls up and stores easily on pallets for easy transport and future deployment.
Inflatable
Easily inflates with a standard air pump.
3’+ High Protection
Protect up to 3ft in height against dangerous floods.
2 Lengths
Available in 15ft and 30ft lengths.
How It Works
1) Pressure Creates Support: Flowing water over the skirt of the Serpent™ will serve as ballast, keeping the Serpent™ inflatable flood barrier positioned securely when protecting against flooding
2) Damming Ability: The damming ability of the Serpent™ is up to around 40” of flooding, making this one of the highest off-the-shelf flood barriers available.
3) Ability to Connect: Serpent™ tubes can be fastened together into a longer inflatable flood protection barrier, using included velcro tube connector sheets.
Setup & Installation
Simple & Easy Setup
Roll Out
Unpack Serpent™ and transport to the protection site
Remove any larger rocks or obstacles
Unroll completely in direction the flood control is needed
Make sure skirt is facing the direction of flooding
Inflate
Unfurl Serpent™ to keep tube open and ready for inflation
Unscrew valve cap and use standard electric air pump with a standard “military valve” air hose adapter (similar to what is used for inflatable kayaks)
Once inflated, replace the valve cap to prevent air leakage
Stake (Dependant on Surface)
String rope through buckles on each Serpent™ tube
Tie a knot that a ground stake can be placed through
Insert ground stake through knot loop and tighten the line
Insert stakes through reinforced holes on skirt for added stability
Attach Sections as Needed To Lengthen Your Flood Barrier
Insert rope through metal loops on adjacent Serpent™ tubes
Tighten tubes to each other and close the spacing between tubes
Unroll and place velcro connector sheet over the two tube and velcro down to seal the gap
Contact Us
Request A Quote
If you’re interested in any of our products, please fill out the form below
or call us directly at 954-299-1968
